This new model has a lot of great features that make it stand out among similar devices on the market. Let’s dive deeper into it and see why Makita MAC 700 is a perfect choice for you.
Makita never disappoints when it comes to innovations and design of their products. MAC 700 has a 120 volt, 2 HP motor that is very energy efficient. The device runs an operating pressure of 130 PSI, thus have an amazing recovery time, uses less electricity, and makes less noise.
- Maximum horsepowers: 2 HP
- Running horsepower: 1,7 HP
- Tank volume: 2.6 gal.
- Performance 40 PSI: 3.8 CFM
- Performance 90 PSI: 3.3 CFM
- Pressure: 130 PSI
- Weight: 52 lbs.
- Noise: 80 dB
- Pump Type: oil-lubricated
- Electric powered
- Shipping weight 60.5 lbs.
- Dimensions: 18 x 22 x 10 inches
- Increased portability and comfortable handle
- Oil-lubricated pump that reduces its wear and lowers the temperature
- Removable cast iron cylinder for prolonged pump life
- Internal thermal overload control
- Low-rate AMP draw decreases incidences of tripped breakers at start-up
- Powerful motor with 2 horsepowers that can produce 3.3 CFM at 90 PSI
- The pump operates at low (1,730) RPM that makes it quieter (80dB)
Makita MAC 700 is packed with a 2.6-gallon tank that can store significant amounts of air. It doesn’t have traditional ball drains; they are replaced by the petcock valve.
It makes discharge simpler and faster. The great thing about this model is Big Bore piston and cast iron pump. Why? Larger piston allows the pump to compress a lot more air. Cast iron pump has more durability and shows high efficiency even when working in hard conditions.
Such piston requires fewer strokes to gather the same volume of air as smaller pistons. It results in lower RPM, less wear of the pump, and lower noise. It is still noise.
However, it is much lower (80 dB) than many similar devices (around 90 dB). MAC 700 is on the same level as dishwasher or garbage disposal, noisy, but not that much.
The durability and anti-wear ability are also worth talking about. Pump and cylinder are made of cast iron that provides a significant chunk of durability. In addition to that, the pump is oil lubricated.
And the oil change process is simple as is because the oil drain plug is easy to reach. The oil change is an excellent way to prolong the pump’s life, unlike in most of the modern compressors where the pump is sealed.
Why is regular oil change better? Oil has a bad quality of losing its viscosity over time. It causes decreased lubrication and cooling.
When temperature growing, the oil expands and, even with the most sealed pump, there is still an oil loss through seepage. The oil change is easy and doesn’t require a lot of troubles. There’s only one thing, Makita suggests using the oil recommended by them.
Next, we have a big air filter, similar to those used on trucks. It ensures clean airflow without dust particles that won’t harm pneumatics, and your paint job will be clean. A large filter can easily handle high volumes of air that is taken by the compressor. Also, it doesn’t require frequent cleanings, unlike smaller filters. To reduce water condensation, discharge tubing is designed with cooling fins.
Makita MAC 700 is the best choice for your home. The device supports pneumatic tools such as staple guns and brad nailers. Also, it works with airbrush attachments and small wrenches. Therefore, any small projects, whether it is fencing, painting, roofing, or carpentry, will be easy with it. Car mechanics works can be supported by MAC 700 as well.
The compressor usage experience is one you would expect. Simple controls and normal features if you dealt with such tools before. It has two pressure gauges that are very easy to use. One is at the tank, and the other one is at the outlet. Controls are regular turn knobs regulators; however, they are pretty accurate.
Its weight (52 lbs) could be a bummer when you need to move the compressor around your working area. A durable carry handle is really useful in this situation. However, little manipulations with dolly wheels could fix the situation if the working surface allows it.
What are the Pros
MAC 700 is a powerful tool that can handle harsh working conditions while doing its job on grade-a levels.
MAC 700 provides 2 HP of power. The gadget is more powerful than many similar models on the market. It can produce 3.3 CFM at 90 PSI to provide industrial-like performance.
Can work and be stored in the cold
The oil-lubricated pump allows you to use the device outdoors, even in cold weather. Also, you can store it outside without fear that you won’t start it tomorrow.
Again, thanks to the oil-lubricated pump, the compressor makes less noise than any other oil-less machine. Regular compressors operate at 90 dB when this one has only 80 bD. The difference may not be significant, but remember that only a few decibels can double the noise.
Convenient and durable design
The whole unit has compact dimensions (18 x 22 x 10 inches) that won’t take a lot of space when you work indoors. Cast iron parts will have a prolonged life and will not wear fast.
Not only the handle protects the compressor’s frame, but it also helps to transport it with ease, without the risk of injury.
Compressor’s feet have rubber dampers that lessen vibration and do not allow the device to scratch the surface it stands on. If you place it on a carpeted surface, it can reduce the noise as well.
The oil-lubricated pump doesn’t make that much heat with friction. Also, there is a finned intercooler tube that also improves cooling.
Doesn’t require regular care
Oil-lubricated mechanisms last longer and don’t overheat, thus don’t require regular maintenance.
Large air filter
MAC 700 carries a large air filter, similar to those used in trucks. It protects the compressor from dust particles. Also, because of its size, it doesn’t require regular cleaning.
What are the Cons
Nobody (in this case, nothing) is perfect, right? Despite being so good, MAC 700 has some features that some users might find upsetting.
2.6-gallon tank is good for home projects with small working surfaces. However, if you want to try something bigger, you would need another device.
Even though the device has a carrying handle, for someone who isn’t physically fit, carrying around a 52 lbs compressor might be hard.
Doesn’t have wheels
Coming from the previous point, it would be better if it was designed with wheels to ease transportation.
Manual will be pretty confusing for people who have never worked with compressors before. It is not clearly worded and filled with terminology that doesn’t match the part list.
MAC 700 costs more than similar devices on the market. However, a high price is compensated by a good performance and stats.
It is a messy process, and some might find it irritating to change oil and check on oil levels every time. Also, not every oil is good and you need to buy only brand recommended oils.
Makita provides a great one year warranty. Besides taking care of all the manufacturing defects, you can return the device to authorized Makita dealerships. You can replace it with a more powerful unit or get a full refund.
In addition to the gadget itself, you will get:
- 1/4″ Universal Quick Coupler, Male
- Air Compressor Oil
As mentioned before, Makita recommends only specific oils for their products, so it is better to use it.
Is Makita MAC 700 Worth Purchasing?
Absolutely! Even though it is more pricey than other models, it is a hard-working compressor that doesn’t need a lot of care and attention. Strong motor with huge air filter provides industrial-level performance that you won’t get in most gadgets. It can handle cold temperatures and harsh working conditions while not losing even a bit of performance strength.
You definitely won’t be disappointed in purchasing Makita MAC 700!