Briggs and Stratton is a well-known manufacturer of air compressors. They offer reliable and easy-to-use compressors of all different sizes.

In this review, we will be comparing the best Briggs and Stratton air compressors based on tank size, horsepower, and cubic feet per minute. So let’s dive in.

Best Briggs & Stratton Air Compressors

ModelTank SizeHPCFM @ 90 PSI
Briggs & Stratton 10 Gallon10-Gallon1.8 hp4 SCFM
Briggs & Stratton 8 Gallon8-Gallon1.5 hp4.1 SCFM

Briggs & Stratton 4.5 Gallon4.5-Gallon1 hp2.3 SCFM
Briggs & Stratton 3-Gallon3-Gallon0.5 hp0.6 SCFM
Briggs & Stratton 4-Gallon4-Gallon5 hp1.1 SCFM

1. Briggs & Stratton 10 Gallon 1.8HP

This vertical air compressor from Briggs & Stratton holds 10-gallons of air. It features a 1.8 horsepower universal motor and an oil-free pump.

The large, rugged wheels and strong handle allow for easy transport and simple mobility. Its maximum pressure is 150psi and outputs 4cfm at around 40psi.

It is recommended for professional and automotive useWhen assembled, it weighs around 70lbs and stands 37.40 inches tall.

It comes with a quick-connect coupler for universal use. You can use it for a framing nailer, impact wrench, air chisel, and more. 

2. Briggs & Stratton 8 Gallon Hotdog

This is an 8-gallon hotdog-style air compressor from Briggs & Stratton. You may notice less noise coming from this air compressor as it has a fully shrouded induction motor and pump.

The CFM at 40psi is 4.8 and the CFM at 90psi is 3.7. It has a 1.5 horsepower motor and a maximum psi of 150. This air compressor has an oil-free pump and weighs roughly 50-pounds.

It stands at 30-inches high and comes equipped with wheels for easier mobility and a removable handle for optimal storage.

[amazon box=”B01EWMF04W”]

3.Briggs & Stratton 4.5 Gallon

It is 80% less noisy than that of standard models. It’s the ideal product for in-home use.

It’s less noisy thanks to the four-pole induction motor. It operates at only 1,700 RPM. Airflow is evenly distributed within the two pumps, resulting in a peacefully quiet machine.

A major benefit of the Quiet Power Technology is that the motor lasts up to 3x longer than that of a standard compressor. 

You can use the compressor with a variety of tools. It outputs 2.3cfm at 90psi and has 1 horsepower.

It weighs 49.4 pounds and measures 18-inches in height. The metal control panel and reinforced frame make for a durable product.

[amazon box=”B01CTNZ05A”]

4. Briggs & Stratton 3 Gallon Air Compressor 

Looking for more bang for your buck? This air compressor by Briggs & Stratton comes complete with an 8-piece accessory kit.

You will get a recoil hose, air chuck, cleaning nozzle, air needles, and more. There are dual pressure gauges on the compressor with an easy-to-use regulator knob for simple operation.

It generates 0.8cfm at 40psi and 0.6cfm at 90psi. This unit holds 3-gallons of air and has a max capacity of 125psi.

It has 0.5 horsepower and is an overall very handy piece of equipment to have for indoor and outdoor projects. 

5. Briggs & Stratton 4-Gallon Air Compressor

This 4-gallon air compressor by Briggs & Stratton is an ideal addition to your garage. It has a max psi of 125 and has 5 horsepower.

The compressor has a very sturdy frame and can be easily moved with the comfort grip handle and easy-to-move wheels.

You will get 1.1cfm at 90psi. This is ideal for brad nailers, staplers, and finish nailers, amongst other tools. 

The compressor comes equipped with dual pressure gauges and a large regulator knob for easy use. Not only that, but you will also get a quick-connect coupling.

This compressor weighs 33-pounds and measures 15.35 inches tall & 16.14 inches wide. It is recommended for use indoors. 

Our Briggs & Stratton Engines Made in China

They began manufacturing their engines in Milwaukee in 1908. Today, 85 percent of Briggs & Stratton engines are made in the states of Georgia, Missouri, and Kentucky. They use mostly U.S. parts but also get parts from other global regions. 

How Long do Briggs & Stratton Engines Last?

If the engines are maintained properly and operated decently, Briggs & Stratton engines can last between 25-30 years. Are you finding that your air compressor is giving you some issues?

Here are some common problems that can arise and how you can fix it to ensure the longevity of your product:

Typical Issues with Briggs & Stratton Engines 

Low or No Pressure

If your air compressor isn’t putting out the pressure it’s capable of, there are a few things you should check: 

  • Check the ball valve and ensure it’s closed. 
  • Check the connections and fittings for leaks. Tighten or reseal, but don’t tighten too much. You can use soapy water on the hose to expose air leaking by the bubbles forming. 
  • Check for holes. If the hose is worn or has holes, replace it. 
  • Check the amount of air that you are using. If there is too much air being used,  adjust the regulator to decrease the air being used. 
  • Check the air requirement. If the requirement is above the CFM and pressure that the compressor is capable of producing, then you may need an upgrade. 

The Motor Isn’t Running

If you find that your motor isn’t running, there are a few common problems that are simple to fix:

  • Make sure your compressor is plugged in properly. You should be using a 120v grounded circuit. Make sure the compressor is plugged into the proper outlet. Never modify the plug to accommodate the outlet.
  • The thermal overload protector within the motor may have tripped. You can fix this by turning off the compressor, unplugging the power supply, and waiting until the motor is cooled off.
    Once the motor is cool, plug it back in after 5-minutes to ensure the thermal overload protector issue has resolved. 
  • Check to see if the relief valve is stuck open. If it’s open, close it. 
  • You may have exceeded the tank pressure switch limit. When the tank pressure drops below the specified cut-in pressure, it will automatically start. 

Are Briggs & Stratton Engines Reliable?

This is a touchy subject for some. Some people have had bad experiences with Briggs & Stratton engines and people who have had good experiences.

The reliability of your engine is dependent on how well you maintain them. If you beat on them and mistreat them, they’re going to perform poorly.

It’s similar to a car. Take care of it and get the oil changed every 3,000-5,000 miles (depending on the type of oil of course) and you’ll have a strong-running engine for years. 

Are They Using Their Own Engines on Their Air Compressors or Are They Using Honda motors? 

Briggs & Stratton uses their own motors in their products. However, the motor can be replaced with a Honda motor.

If you want a breakdown of Honda vs Briggs & Stratton motors, here it is!

Briggs & Stratton

The Briggs & Stratton motors have excellent air intake systems. They feature an advanced filtration and cooling system.

This system gives the engine a lower running temperature, which can extend its life. Since there are so many engines from Briggs & Stratton on the market, there are some bad eggs and solid engines you can buy. 


Honda engines are more expensive, but they perform better and last longer. Not only that, but they are much quieter and have a silky smooth pull cord.

The downfall of Honda motors is that they don’t tolerate water in the fuel well. The Honda engines also have less horsepower than the Briggs & Stratton engines.

Honda only has three main engines that can be put in Briggs & Stratton products. The GCV 16 & GCV 190 for residential equipment and GXV690 for commercial equipment. 

Briggs & Stratton vs Porter Cable Air Compressor

Both Briggs & Stratton and Porter-Cable are well-known and respected companies. They manufacture a variety of products that are used every day around the globe.

One of these products is the air compressor. So what’s the difference between the two brands? 


In terms of shape, if it’s something you consider when buying an air compressor, the two companies are very different.

Porter-cable favors the pancake tank whereas Briggs & Stratton favor the hotdog and vertical tank. However, Porter Cable does have a small selection of vertical tanks. 


Both Briggs & Stratton and Porter-Cable are pretty equal in price. Their smaller models are in the same price range as well as their larger models. 


If item color matters to you, then you’ll want to pay attention to this. Porter-Cable is red and Briggs & Stratton is black. 

2020 Update: Why is Briggs & Stratton Closing?

Briggs & Stratton, although not closing all of their locations, is closing two of their plants and reducing operations at another one.

They have stated that they are closing those plants due to the falling demands for their outdoor power equipment. Their sales decreased by $2.4 million in 2012.

They had plans to consolidate their Newbern, TN, and McDonough, GA plants. They will close the Ostrava, Czech Republic plant as well.

There is also talks of Briggs & Stratton putting a hold on operations at it’s Bluff, MO plant by reducing capacity. The lawn and garden market had declined 33% before these decisions, something that hasn’t been seen in decades. 

Briggs & Stratton Air Compressors Parts 

About the Company

Briggs & Stratton specializes in a variety of equipment along with their air compressors. They offer other equipment such as:

  • Light towers
  • Generators
  • Heaters
  • Agricultural products
  • Commercial zero-turns
  • Water pumps
  • Pressure washers
  • Forest & garden products
  • Mowers

It seems that they offer more commercial products than residential ones. However, there are a variety of products that can be used for residential, such as air compressors.

You can use them for commercial jobs, but they may have a reduced warranty.